Installing Hyper-V 2008 R2 SP1 on IBM X346 with ADAPTEC SCSI u320 controller

It could be pretty tricky to install Hyper-V 2008 R2 SP1 on IBM x346 with Adaptec controller. If didn’t want to throw away my old server so I decided to install Hyper-V on it to create testing environment.

I do this with colleague of mine, and we faced with problem. Hyper-V wont install on IBM x346. Why? Server asked for driver….

I think that driver is so old that Hyper-V don’t have it in its drivers database, and You can’t install it using ServerGuide CD.

What were we do.

After spending hours trying to install Hyper-V on IBM x346 with Adaptec u320 SCSI controller, finally we have solution.

My colleague Luka Gros spend finds x64 driver for Adaptec SCSI controller. He found it on this link.

After downloading, you must extract this driver and burn it on CD

Steps what we are do after that is:

booting from Hyper-V 2008 R2 SP1 and starting installation

when asked for driver change CD to one with driver and click Browse

find driver on CD and click Next

change CD to installation CD again and finish your installation

Hyper-V is installed and running fine now

Smiješak

P.S.

If You need to manipulate with physical HDD on your Hyper-V, MMC console will return error “RPC server unavailable”.

To avoid this run this command with elevated privileges:

netsh advfirewall firewall set rule group=”Remote Volume Management” new enable=yes

Thanks to Luka Gros

Deploying Windows XP SP3 without GPO and WSUS

If You are managing wide infrastructure of your organization You could be unpleasantly surprise that Windows XP SP3 is not deployed to every Windows XP machine.

For some reason WSUS is not an option and GPO is upgraded to Windows Server 2008 R2 functionality. What You will do?

Using GPO is not an option because of too much configuration and lot of requested modification.

Using of logon script could be a point.

Requests is that you can deploy and install Windows XP SP3 without disturbing users.

At first we must create temporary user with administrative rights

After that we must download lsrunas tool. We will use it for passing the password. You can download it from here.

After that we will put Windows XP SP3 (WindowsXP-KB936929-SP3-x86-ENU) in network share accessible for domain users.

Check that every user can see it.

Create .bat script with following parameters

lsrunas.exe /user:tempadmin /password:password /domain:domain /command:xpsp3.cmd /runpath:

Create .cmd script with parameters:

net use x: /delete /y (where x is logical name of ntw share where SP3 is)

net use x: \\server\share ( reconnect share)

x:

cd sp3 (where Sp3 is name of directory where .exe file is)

WindowsXP-KB936929-SP3-x86-ENU.exe /quiet /promptrestart

Job done.

You can use this switches:

[/help] [/quiet] [/passive] [/norestart] [/forcerestart] [/warnrestart] [/promptrestart] [/overwriteoem] [/nobackup] [/forceappsclose] [/integrate: ] [/d: ] [/log: ]
/help Displays this message
SETUP MODES
/quiet Quiet mode (no user interaction or display)
/passive Unattended mode (progress bar only)
RESTART OPTIONS
/norestart Do not restart when installation is complete
/forcerestart Restart after installation
/warnrestart[: ] Warn and restart automatically if required (default timeout 30 seconds)
/promptrestart Prompt if restart is required
SPECIAL OPTIONS
/overwriteoem Overwrite OEM files without prompting
/nobackup Do not backup files needed for uninstall
/forceappsclose Force other programs to close when the computer shuts down
/integrate: Integrate this software update into
/d: Back up files into
/log: Create log file at