Configuring VPN connection on server 2008 R2 using RRAS and configuring clients

One colleague ask me to help him with detailed steps how to configure VPN on server 2008 R2 and how to configure Windows XP and Windows 7 clients. So here it is.

Configuring VPN on server 2008 R2

Configuring VPN start with adding server role for RRAS.

Just follow next two pictures what to choose

Capture1

Capture2

Wait for wizard to finish, and then you will get this picture

Capture3

Now you have role installed. You must configure and enable RRAS

When you click on option Configure and Enable RRAS new wizard will start. Just follow the wizard in next 5 pictures.

Capture4Capture5Capture6

NOTE: You MUST have two NIC configured, one for internal use (LAN) and one for external use (WWW)

Capture7

Capture8

I prefer to choose IP address range and number of possible connecting clients son next picture will shown how to do that

Capture9

Capture10

If you have AD infrastructure configure your RRAS like this

Capture11

After this you will get this picture and click Finish

Capture12

Now your Server have successfully configured RRAS. Smile

Capture 14

Configuring client on Windows 7  for VPN access

Go to network and sharing center and choose option set up a new connection or network

Capture

Choose option Connect to a workplaceCapture2

For previously described configuration of RRAS option Use my Internet connection (VPN) will be right choice.

Capture3

Type your DNS name of RRAS server or public IP address, and follow steps in next three pictures.

Capture4Capture5Capture6

Additional option as authentication protocols can be founded in properties of your VPN connection. Most commonly used is already checked.

Capture7

Configuring client on Windows XP for VPN access

On Windows XP go to Network Connections and click Create a new connectionCapture1

A wizard will start. Follow next three pictures.

Capture2Capture3Capture4

Choose name for your VPN connection

Capture5

Type DNS name or public IP address of your previously configured RRAS (VPN) server

Capture6

Well done you are configure client for VPN access. Now you need to type your username and password before connect.

Capture8

Steps for configuring additional authentication protocols (if needed) is described in next two pictures. At first you must click Properties.

Capture9Capture10

I hope that this is helpful

BR

D.

Advertisements